jueves, 17 de marzo de 2011

CHEMISTRY OF PETROCHEMICAL PROCESSES - SAMI MATAR & LEWIS F. HATCH.


CONTENIDO DEL LIBRO:

CHAPTER ONE: Primary Raw Materials for Petrochemicals
1.1 Introduction
1.2 Natural Gas
Natural Gas Treatment Processes, Natural Gas Liquids, Properties of Natural Gas
1.3 Crude Oils
Composition of Crude Oils, Properties of Crude Oils, Crude Oil Classification
1.4 Coal, Oil Shale, Tar Sand, and Gas Hydrates

CHAPTER TWO: Hydrocarbon Intermediates
2.1 Introduction
2.2 Paraffinic Hydrocarbons
Methane, Ethane, Propane, Butanes
2.3 Olefinic Hydrocarbons
Ethylene, Propylene, Butylenes
2.4 Dienes
Butadiene, Isoprene
2.5 Aromatic Hydrocarbons
Extraction of Aromatics
2.6 Liquid Petroleum Fractions and Residues
Naphtha, Kerosine, Gas Oil, Residual Fuel Oil

CHAPTER THREE: Crude Oil Processing and Production of Hydrocarbon Intermediates
3.1 Introduction
3.2 Physical Separation Processes
Atmospheric Distillation, Vacuum Distillation, Absorption Process, Adsorption Process, Solvent Extraction
3.3 Conversion Processes
Thermal Conversion Processes, Catalytic Conversion Processes
3.4 Production of Olefins
Steam Cracking of Hydrocarbons, Production of Diolefins

CHAPTER FOUR: Nonhydrocarbon Intermediates
4.1 Introduction
4.2 Hydrogen
4.3 Sulfur
Uses of Sulfur, The Claus Process, Sulfuric Acid
4.4 Carbon Black
The Channel Process, The Furnace Black Process, The Thermal Process, Properties and Uses of Carbon Black
4.5 Synthesis Gas
Uses of Synthesis Gas
4.6 Naphthenic Acids
Uses of Naphthenic Acid and Its Salts
4.7 Cresylic Acid
Uses of Cresylic Acid

CHAPTER FIVE: Chemicals Based on Methane
5.1 Introduction
5.2 Chemicals Based on Direct Reactions of Methane
Carbon Disulfide, Hydrogen Cyanide, Chloromethanes
5.3 Chemicals Based on Synthesis Gas
Ammonia, Methyl Alcohol, Oxo Aldehydes and Alcohols, Ethylene Glycol

CHAPTER SIX: Ethane and Higher Paraffins-Based Chemicals
6.1 Introduction
6.2 Ethane Chemicals
6.3 Propane Chemicals
Oxidation of Propane, Chlorination of Propane, Dehydrogenation of Propane, Nitration of Propane
6.4 n-Butane Chemicals
Oxidation of n-Butane, Aromatics Production, Isomerization of n-Butane
6.5 Isobutane Chemicals
6.6 Naphtha-Based Chemicals
6.7 Chemicals from High Molecular Weight n-Paraffins
Oxidation of Paraffins, Chlorination of n-Paraffins, Sulfonation of n-Paraffins, Fermentation Using n-Paraffins

CHAPTER SEVEN: Chemicals Based on Ethylene
7.1 Introduction
7.2 Oxidation of Ethylene
Derivatives of Ethylene Oxide, Acetaldehyde, Oxidative Carbonylation of Ethylene
7.3 Chlorination of Ethylene
Vinyl Chloride, Perchloro- and Trichloroethylene
7.4 Hydration of Ethylene
7.5 Oligomerization of Ethylene
Alpha Olefins Production, Linear Alcohols, Butene-l
7.6 Alkylation Using Ethylene

CHAPTER EIGHT: Chemicals Based on Propylene
8.1 Introduction
8.2 Oxidation of Propylene
Acrolein, Mechanism of Propene Oxidation, Acrylic Acid, Ammoxidation of Propylene, Propylene Oxide
8.3 Oxyacylation of Propylene
8.4 Chlorination of Propylene
8.5 Hydration of Propylene
Properties and Uses of Isopropanol
8.6 Addition of Organic Acids to Propene
8.7 Hydroformylation of Propylene: The Oxo Reaction
8.8 Disproportionation of Propylene (Metathesis
8.9 Alkylation Using Propylene

CHAPTER NINE: C4 Olefins and Diolefins-Based Chemicals
9.1 Introduction
9.2 Chemicals from n-Butenes
Oxidation of Butenes, Oligomerization of Butenes
9.3 Chemicals from Isobutylene
Oxidation of Isobutylene, Epoxidation of Isobutylene, Addition of Alcohols to Isobutylene, Hydration of Isobutylene, Carbonylation of Isobutylene, Dimerization of Isobutylene
9.4 Chemicals from Butadiene
Adiponitrile, Hexamethylenediamine, Adipic Acid, Butanediol, Chloroprene, Cyclic Oligomers of Butadiene

CHAPTER TEN: Chemicals Based on Benzene, Toluene, and Xylenes
10.1 Introduction
10.2 Reactions and Chemicals of Benzene
Alkylation of Benzene, Chlorination of Benzene, Nitration of Benzene, Oxidation of Benzene, Hydrogenation of Benzene
10.3 Reactions and Chemicals of Toluene
Dealkylation of Toluene, Disproportionation of Toluene, Oxidation of Toluene, Chlorination of Toluene, Nitration of Toluene, Carbonylation of Toluene
10.4 Chemicals from Xylenes
10.5 Terephthalic Acid, Phthalic Anhydride, Isophthalic Acid

CHAPTER ELEVEN: Polymerization
11.1 Introduction
11.2 Monomers, Polymers, and Copolymers
11.3 Polymerization Reactions
Addition Polymerization, Condensation Polymerization, Ring Opening Polymerization
11.4 Polymerization Techniques
11.5 Physical Properties of Polymers
Crystallinity, Melting Point, Viscosity, Molecular Weight, Classification of Polymers

CHAPTER TWELVE: Synthetic Petroleum-Based Polymers
12.1 Introduction
12.2 Thermoplastics
Polyethylene, Polypropylene, Polyvinyl Chloride, Polystyrene, Nylon Resins, Thermoplastic Polyesters, Polycarbonates, Polyether Sulfones, Poly(phenylene) Oxide, Polyacetals
12.3 Thermosetting Plastics
Polyurethanes, Epoxy Resins, Unsaturated Polyesters, Phenol-Formaldehyde Resins, Amino Resins
12.4 Synthetic Rubber
Butadiene Polymers and Copolymers, Nitrile Rubber, Polyisoprene, Polychloroprene, Butyl Rubber, Ethylene Propylene Rubber, Thermoplastic Elastomers
12.5 Synthetic Fibers
Polyester Fibers, Polyamides, Acrylic and Modacrylic Fibers, Carbon Fibers, Polypropylene Fibers

Appendix One: Conversion Factors
Appendix Two: Selected Properties of Hydrogen, Important C1–C10 Paraffins, Methylcyclopentane, and Cyclohexane

TIPO DE ARCHIVO: Pdf.

PAGINAS: 405 pags.

TAMAÑO: 4.98 MB.

DESCARGA EN MEGAUPLOAD:

lunes, 28 de febrero de 2011

CALCULOS DE IPR (INFLOW PERFORMANCE RELATIONSHIP)

El potencial productivo de un reservorio de hidrocarburos puede ser representado a partir de la relación que existe entre el caudal de fluido que puede aportar y la presión dinámica del mismo. Así mismo la representación de cada uno de estos puntos la denominamos IPR (Inflow Performance Relationship) y es de suma importancia a la hora de evaluar el potencial y la capacidad de producción de distintos reservorios.

La siguiente planilla de cálculo, en su primera versión, les ofrece una herramienta simple y aproximada para poder representar los IPR en condiciones de flujo monofásico (Darcy Analítico y empírico), flujo bifásico en reservorios saturados (Vogel) y la combinación de Vogel-Darcy para el caso de reservorios Sub-saturados donde las presiones dinámicas bajan por debajo de la presión de burbuja.

CONTENIDO DE LA PLANTILLA:
  1. Calculo de IPR Darcy - Metodo Analitico.
  2. Calculo de IPR Darcy - Metodo Empirico.
  3. Calculo de IPR Darcy - Metodo Empirico.
  4. CAlculo de IPR Vogel.
  5. Calculo IPR Vogel Darcy - Metodo Combinado.
TIPO DE ARCHIVO: Excel.

TAMAÑO: 215 KB.

DESCARGA EN MEGAUPLOAD:

jueves, 17 de febrero de 2011

APLICACION DE LA ECUACION DE BALANCE DE MATERIALES PARA YACIMIENTOS SUBSATURADOS - EJERCICIO.

Partiendo de la ecuación general de balance de materiales, demuestre la ecuación de balance de materiales para yacimientos subsaturados.

Solucion:

Se pide demostrar la Ecuación de Balance de Materiales para Yacimientos Subsaturados, así pues la Ecuación General de Balance de Materiales viene dada por:


Siendo un yacimiento subsaturado no se ha llegado a la presión de burbujeo, por tanto no se tiene presente capa de gas, todo el gas está disuelto en el petróleo; adicionalmente se asumirá el acuífero como poco representativo y se despreciará la producción de agua, así pues:

m = 0XXXXXRp = RsXXXXXRsi – Rs = 0

We = 0XXXXXWp = 0

Tal que:


Quedando la Ecuación de Balance de Materiales reducida a:


Multiplicando y dividiendo por Boi:


Se sabe que la compresibilidad viene dada por:


Derivando:


Aplicándolo a la compresibilidad del petróleo:


Despejando:


Sustituyendo este factor en la ecuación reducida:


Sacando factor común N Boi ∆P:


El término siguiente es constante y lo podemos denotar como Ce:


Sustituyéndolo en la ecuación:


Esta vendria a ser la Ecuación de Balance de Materiales Simplificada para un Yacimiento Subsaturado.

jueves, 10 de febrero de 2011

GEOLOGY IN PETROLEUM PRODUCTION - A. J. DIKKERS


CONTENIDO DEL LIBRO:
  • Preface.
  • Legend
  • Abreviations and Symbol.
  • Chapter A.- Introduction.
  • Chapter B.- Correlation.
  • Chapter C.- Tectonics.
  • Chapter D.- Reservoir Geology.
  • Chapter E.- Reservoir Fluids.
  • Chapter F.- Accumulations Conditions.
  • Chapter G.- Appraisal Drilling.
  • Chapter H.- Development Drilling.
  • Chapter I.- Rserve Estimates.
  • Chapter J.- Field Review Study.
  • Chapter K.- Epilogue.
TIPO DE ARCHIVO: Pdf.

PAGINAS: 255 pags.

TAMAÑO: 3.44 MB.

DESCARGA EN MEGAUPLOAD:

sábado, 9 de octubre de 2010

OPTIMIZACION DE LA PRODUCCION MEDIANTE ANALISIS NODAL - ESP OIL.


CONTENIDO DEL LIBRO:
  • CAP 01.- El Sistema de Producción.
  • CAP 02.- Comportamiento de Afluencia de Formaciones Productoras.
  • CAP 03.- Flujo Multifasico en Tuberías.
  • CAP 04.- Capacidad de Producción del Sistema.
  • CAP 05.- Optimizacion del Sistema de Producción.
TIPO DE ARCHIVO: Pdf.

PAGINAS: 131 pags.

TAMAÑO: 3.61 MB.

DESCARGA EN MEGAUPLOAD:

sábado, 2 de octubre de 2010

SISTEMA DE ELEVACION - ING. CARLOS RAMIREZ.


CONTENIDO DEL LIBRO:

TIPO DE ARCHIVO: Pdf.

PAGINAS: 61 pags.

TAMAÑO: 3.70 MB.

DESCARGA EN MEGAUPLOAD:

viernes, 1 de octubre de 2010

SISTEMA DE IZAMIENTO.


CONTENIDO DEL ARCHIVO:
  • Sistema de Izamiento.
  • Subestructura.
  • Castillo o Mastil.
  • El Malacate.
  • La Corona (Crown Block).
  • Moton o Bloque Viajero (Travelling Block).
  • Gancho.
  • Cable de Perforacion.
  • Equipos Auxiliares.

TIPO DE ARCHIVO: .Pdf.

PAGINAS: 27 pags.

TAMAÑO: 2.65 MB.

DESCARGA EN MEGAUPLOAD: