- Drilling Fluid Classifications.
- Basic Engineering Calculations.
- Material Balance.
- Water-Based Drilling Fluids Testing Procedures.
- Oil-Based Drilling Fluids Testing Procedures.
- Permeability Plugging Test (PPT).
- Pilot Testing.
- Basic Chemistry.
- Contamination of Water-Based Drilling Fluids.
- Rheology.
- Introduction.
- Flow Regimes.
- Yield-Power Law Rheology, Hydraulics, and Hole Cleaning.
- Introduction.
- Dry Gas Drilling Fluids.
- Mist Drilling Fluids.
- Foam Drilling.
- Gasified (Aerated) Mud Drilling Fluids.
- NON-INHIBITIVE FLUIDS.
- Introduction.
- Clear Water.
- Native Muds.
- Bentonite-Water Muds.
- Lignite-Lignosulfonate (Deflocculated) Muds.
- INHIBITIVE FLUIDS.
- Introduction.
- Calcium-Based Muds.
- Salt-Based Muds.
- Potassium-Based Muds.
- POLYMER FLUIDS.
- Introduction.
- Non-Dispersed Polymer Muds.
- Introduction.
- Oil Mud Applications.
- Oil Mud Products Description.
- Types of Base Oils Used.
- Oil Mud Formulations.
- Mixing Procedures.
- Oil Mud Properties.
- Trouble Shooting Oil Muds.
- Displacement of Special Equipment.
- Oil Mud Calculations.
- Electric Logging in Oil Muds.
- COMPLETION FLUIDS.
- Introduction.
- Sensitivity Studies.
- Completion Fluid Types.
- Oil-Based Fluids.
- Clear Brine Fluids.
- Determining Fluid Cleanliness.
- Displacement.
- Filtration.
- System Maintenance.
- CORING FLUIDS.
- Filtration.
- Other Considerations.
- Oil Mud Coring Fluid.
- PACKER FLUIDS.
- Water-Based Drilling Muds.
- Oil-Based Muds.
- TRACERS.
- Nitrates.
- Iodide.
- Lithium.
- Bromides.
- Radioactive Tracers.
- SHALE STABILITY.
- Introduction.
- Problems Caused by Shale Instability.
- Factors Causing Shale Instability.
- Classification of Problem Shales.
- Shale Stabilization with Drilling Fluids.
- STUCK PIPE.
- Introduction.
- Differential Pressure Sticking.
- Keyseating.
- Cuttings Accumulation.
- LOSS OF CIRCULATION.
- Introduction.
- Induced Lost Circulation.
- Naturally Occurring Loss of Circulation.
- CORROSION.
- Introduction.
- Types of Corrosion.
- Factors Affecting Corrosion.
- Corrosion in Drilling Fluids.
- Corrosion Rates.
- Introduction.
- Drilling Fluid Toxicity.
- Free Oil - Sheen.
- Toxic Components in Drilling Fluids.
- Onshore Mud and Cuttings Disposal.
- Exploration and Production Waste.
- Onshore Disposal Methods.
- Definitions.
AUTOR: Amoco Production Company.
PAGINAS: 444 pags.
TAMAÑO: 5.32 MB.
DESCARGA EN MEGAUPLOAD:
Good Post
ResponderEliminarhttp://www.manekgroup.net/6_0_Drilling-Fluids-(-MDF-Series).aspx